Flex3Drive for Kossel XL and other Delta printers

Here we present our Flex3Drive for Kossel XL and other delta style printers that may be using magnetic rod couplings. This version is available with the option of either steel balls or manetic cups attached to the effector. The product comes complete with the end effector and extruder assembly, and all aniciliary parts required for the full installation.

  • Product Status – Now Available!
Purchase Now

 

Features include:

  • Magnetic cup or steel ball options
  • Reliable two bar rigid linkage tensioner design with quick release cam lever action – no screws no springs same tension every time
  • Optional screw based adjuster for easy fine adjustment control when needed
  • Available in 1.75 or 3mm versions
  • Compatibility with the widest range of hotends (JHead/E3D/Pico/Buda and more)
  • Prints with all filaments from super soft flexibles to super hard nylons and carbons
  • 40:1 gear ratio means highest resolution filament control of any extruder currently available
  • Fully contained filament force path – nowhere for the filament to go except down
  • Integrated hotend mounting clamps the hotend securely
  • Print flexible filaments reliably
  • Just print new parts as and when any improvements or updates are released
  • Integrated hotend cooling and is supplied with 25mm fan
  • Powerful enough for hi flow rate Volcano hotends
  • Smoothly print fine (50 micron or less) layer heights
  • Torquey enough for high speed machines
  • Available with any length driveshaft from 650mm upwards (700mm supplied as standard)
  • Compatible with all electronics and any 1.8 degree nema17 motor
  • Available with mounting point for the Mini IR Sensor board by the excellent Dave Crocker

Whats in the Box?

  • Complete and assembled Flex3Drive extruder and effector assembly
  • Printed parts in Black ABS as standard – other colours available upon request (specify with order)
  • Flexible Driveshaft with driveshaft connector
  • Motor mount assembly
  • Motor Cap
  • PTFE Tubing for driveshaft and filament guide (2mtrs)
  • Tubing Clips
  • Hotend Shroud (to chosen hotend spec)
  • 25mm hotend fan
  • Screw based tesnion arm with bearing
  • Fastener Kit

 

Please note we are currently experiencing heavy demand for our products so there is a short lead time of 5-10 days on some orders. We are grateful for your understanding and patience while we take steps to reduce this lead time. Thank you. Dismiss